|
 
 
 
President
Dave Gardiner
Vice President
Skip Bucher
Treasurer
Ellen Kramer
Secretary
Steve Barker
Directors
Steve Talmadge
Bill Hinderliter
Joe Venth
Jeff Klaverweiden
David Young
Announcer
&
Editor
Nes Kramer
|
LIAPA Movies
Note to view movies you must download
QUICKTIME MOVIE PLAYER
or
REAL PLAYER
To download a FREE Copy of Quicktime Movie Player
Click Here
To download a FREE Copy of Real Player
Click Here
Newer Movies near the end of the page automatically link to "Youtube"
*Movies are LARGE in file size and will take time to download especially with dial-up connections. So be patient!
View Kenny Edwards Massey 44 Tractor Pull. Movie is 6mb.
Click here to view
View LIAPA's 1929 Buffalo Springfield Steam Roller Dressing up our Pulling Track. Movie is 7mb.
Click here to view
View the competition between father and son, as Steve Ravenhall and his son Matt battle in Bridgehampton, N.Y. over which is stronger, Dads Ford Pickup or Matt's John Deere. Movie is 7mb.
Click here to view
Long Island Antique Power's Large Engines working display @ Riverhead, NY 2006. Owned and Operated by Dieter Lund and Tom Voellm. Movie is 2.2mb.
Click here to view
A 1928 Maytag Gas Engine Powered Original Washing Machine. Owned by Bruce Young. Movie is 2.5 mb.
Click here to view
A Large Engine operating a water pump. Movie is 2.3mb.
Click here to view
Steve Wolbert attempting to pull the sled with approx. 10 tons with his GMC. Does he make it or break it? Movie is 10mb.
Click here to view
Tuccio's Plow Day 2007
The following movie clips are just a few of our members
plowing one of the two fields at Tuccio's Farm
on May 6, 2007
Clip 1
Clip 2
Long Island Railroad Museum August 2007
Clip 1
Clip 2
Clip 3
Long Island Antique Power / Fall Show 2007
Steve Wolbert in his 1950 Caterpillar 2u series D8 vs Steve Barker in a CAT D7A in a Full Out Tug-O-War. Which Caterpillar will win?
Click here to view
Tucchios Farm Plow Day May 2008
Video 1 Video 6 Video 2 Video 5 Video 3 Video 4 Video 7 Video 8
Long Island Antique Power Association's
July 2008 Show
Garden Tractor pull with a Economy Tractor
Click here to view
Gene Sheppard grading with a 1938 AutoPatrol
Click here to view
Engineer, Jeff Klaverweiden operating our
1927 Buffalo Springfield Roller
Click here to view Movie 1
Click here to view Movie 2
A 3 cylinder Atlas Imperial Engine operating a air compressor
Click here to view Movie 1
Click here to view Movie 2
Engine Tech., Dieter Lund attempting to start another Large Engine
by using the compressed air provided by the Atlas Imperial
Click here to view
A General Motors Diesel Engine running
Click here to view
A stationary engine operating a large pitcher type water pump
Click here to view
A 15 hp. Fairbanks Morse Engine Operating
Click here to view
A Small Hit & Miss Engine Powering a Blower
Click here to view
Pete Maganoli, Sr. on his International Pulling
Click here to view
Matt Kondenar on his Farmall 400 Pulling
Click here to view
Ken Edwards on his Massey 44 Pulling
Click here to view
Matt Ravenhall on a John Deere "R" Pulling
Click here to view
Bill Hinderliter on his Fordson Major Pulling
Click here to view
Pete Gladysz on his John Deere "A" Pulling
Click here to view
George Venth, Sr. on his Ford 9N Pulling
Click here to view
Gene Shepherd on his Fordson Roller Dressing the Track
Click here to view
Matt Ravenhall on a John Deere 830 Pulling
Click here to view
Robert Watral on a John Deere 730 Dually Pulling
Click here to view
A Caterpillar BullDozer Pulling
Click here to view
Ken Edwards pulling the sled and pullin' a wheelstand
Click here to view
Fields of Power 2008
Foster Family Farm
Carl Cardo on the John Deere A
Click here to view
Peter Maganoli, Sr. on the International 600
Click here to view
Bill Pfeffer operating the Peerless Steam Tractor owned by Cliff Foster
Click here to view
A Farmall M operating a buzzsaw being belt driven. Part 1
Click here to view
Part 2 of the buzzsaw operating
Click here to view
Dieter Lund, Billy Shea and Tom Voellm operating the stationary engines.
Click here to view
A Tractor from the Minneapolis Machine Company using it's belt drive to operate a Shingle Mill circa 1889
Click here to view
View #2 of the Minneapolis operating the shingle mill
Click here to view
View #3 of the Shingle Mill and Tractor in action
Click here to view
View #4 of the Actual Shingles being made and finished product.
Click here to view
A well restored Hit & Miss Engine in action
Click here to view
Bill Hinderliter, Tom Voellm, Dieter Lund and Billy Shea showing the procedure on starting one of these stationary engines.
Click here to view
Kenny Edwards with his Massey 44 making a pull.
Click here to view
Two Vintage Navy Stearmen Airplanes "Buzzing" the field. These
were used as the first training airplanes for beginner pilots.
Click here to view
The Grey DeHavilland Tigermoth Navy Bi-Wing Plane taking off down the runway.
Click here to view
A DeHavilland Tigermoth bi-wing plane on approach, down the runway and then pulling up at the end of the strip. These planes were used in the Royal Air Force.
Click here to view
The Navy Stearmen Bi-Wing airplane landing.
Click here to view
2 of the planes taking off with a good view of the Navy DeHavilland Tigermoth Airplane close to the ground. Also some unexpected commentary, try and pick out who it is!
Click here to view
Village of Patchogue's
St. Patrick's Day Parade 2009
A behind the scenes look of what is involved preparing to be apart of one of the largest parades on Long Island. Don't Laugh!!
Click here to view
Hallockville Plow Day
April 19th. 2009
The Jamesport Annual Holiday Parade
07/08/2009
A video of one of the many stock cars being featured at this years annual summer show. This one is of the famous "Ace of Spades" 1932 Ford Coupe driven by Long Island driver, Al DeAngelo. This one happens to be the original car for AlClick here to viewA video of the members who attended the parade. This one is for Suzie Young, she made it known at the end of the video that she wanted to see it before it made it here, OOPS!
Click here to view
The 17th. Annual Summer Show
July 18th & 19th. 2009
The 1932 Ace of Spades Ford Coupe of Long Island Racing Legend, Al DeAngelo
Click here to view
Fran Bujnicki and his grandson Michael pulling 750 lbs. with his
John Deere 317
Click here to view
Chris Ormond of Mattituck making a full pull on his Cub Cadet "Slow and Furious"
Click here to viewTed Beach pulling with his Cub Cadet making a full pull
Click here to viewJames Sepenoski pulling with his john deere and spinning the tires
Click here to view
Nick Maganoli making a full pull on his cub cadet
Click here to view
Steven Barszczewski making a full pull on his cub cadet
Click here to view
David Shepherd on his mini-John Deere 830 making a full pull
Click here to view
Tyler Shepherd on his John Deere 110 making a full pull
Click here to view
Tom Pansini Sears ST16 making a full pull
Click here to view
Joe Pansini on his Sears ST16 garden tractor making a full pull
Click here to view
Pete Maganoli, Sr. pulling with his cub cadet, stick through this one folks, does he make it?
Click here to view
Steven Barszczewski pulling with his cub cadet and making a full pull
Click here to view
Pete Maganoli, Jr. Making a pull
Click here to view
Steve Barszczewski just trying to stay on the track
Click here to view
Tyler Shepherd just pulling it out!!
Click here to view
Tom Pansini making it look easy at 2400lbs.
Click here to view
Chris Ormond standing the front end up for 3/4 of the track
Click here to view
The Young Family Building Dedication Ceremony
Click here to viewGene Shepherd Pulling with his John Deere 830
Click here to view
Rob Watral pulling with the John Deere 730
Click here to view
Gene Shepherd, Jr. Pulling 14,200 lbs with the Watral families propane powered John Deere 4410
Click here to view
Steve Barker pulling with the Cardo Families John Deere 830 Diesel
Click here to view
Matt Kendenor pulling 17,400 lbs. with his Farmall 400
Click here to view
David Shepherd pulling 16,600 lbs. with the Watral 730 Diesel
Click here to view
David Shepherd pulling 14,200 lbs. with the John Deere 530 Propane Powered Tractor
Click here to view
Joe Pansini pulling 13,400 lbs. with his Oliver 880
Click here to view
Joe Venth pulling 11,000 lbs. when the key way on the wheel hub snapped on his Farmall 340
Click here to view
Fletch Bedell on his John Deere A making a full pull.
Fletcher Past Away 2 months after this video was taken.
Rest in Peace Fletch
Click here to view
Steve Gittleman on his John Deere R diesel making a full pull of 8,600 lbs. Commentary included by Gene Shepherd and Steve Barker
Click here to view
Tim Dahlen and his co-pilot making a full pull of 7,000 lbs on his John Deere A
Click here to view
John Deere "Joe Velazquez" pulling around the hay wagon and getting a "Toot" of the whistle from Jeff Klaverweiden on the Buffalo Springfield Steam Roller
Click here to view
Ed Shaffer pulling 7,000 lbs. with his John Deere A and making a full pull
Click here to view
Joe Pansini on his Sears ST-30 pulling 2000lbs. and the rear end says "No More"
Click here to view
The Charlie Jazombek #1 Coupe Running
Click here to view
Steady Eddie Flemke's 2x Coupe and The Flying Dutchman Freddie Harbach's Coupe. Both cars running.
Click here to view
A Portion of our Annual Parade of Power.
Click here to view
John Kendall giving a brief insight to one of his hit and miss engines.
Click here to view
A small hit and miss engine running
Click here to view
Charlie Hughes with his and many other displays of small engines
Click here to view
A 1918 Economy hit and miss motor running and operating a jack and Dokota Kibler reading a book.
Click here to view
Matt Ravenhall with Carl Cardo's 830 trying to pull it out!
Click here to view
Paul Watral's John Deere 730 pulling 15 ton
Click here to view
Steve Barker making a pull with Carl Cardo's 830
Click here to view
Bob Dowd's engine and water pump
Click here to view
We're adding videos from time to time so check back
 |
[Home]
© 2010 LIAPA
|
Click HERE to read
the current LIAPA Newsletter!
Interested in Joining the LIAPA? Click HERE to download the application.
|
